Wanted:Space 1999 Stun Gun

Megamicrofish · 01-05-2012, 10:33 AM

I am after a good quality Space 1999 Stun Gun
Cash waiting or I may have something to trade

Thanks

Megamicrofish · 19-05-2012, 04:03 PM

Somebody must have one they want to part with ?

Cash waiting!

**w8cmp** · 13-07-2012, 11:35 AM

A good one is pretty rare - and you're talking to fans here who would want it for themselves. Quite rare for one to be traded...

There are however plenty of resin kits of varying quality available on the internet if you wanted to go that route. Check out eBay for example to find quite a few normally available

Megamicrofish · 13-07-2012, 11:50 AM

I know it's a long shot
I did have a pair of Sidkits (both seasons) at one time but sold them on when things were tight.
Unfortunately none of the resin kits seem accurate.
I'm really after a Propmaker, sidkit or perhaps the product enterprise set.

**w8cmp** · 14-07-2012, 07:18 AM

The Product Enterprise ones are not completely accurate by the way - nice but not quite right, and they don't have the nice weight of a Propmaker model.

*Edited by Bernie to remove old link*

**rockwellcm** · 14-07-2012, 01:16 PM

Just to add to Chris`s post the PE StunGun Commlock is slightly underscale also.

Megamicrofish · 25-07-2012, 06:21 PM

Well, I have struck a deal with a member here and a Propmaker Stun Gun is on its way to me

**w8cmp** · 30-07-2012, 08:54 AM

Well done - you won't be disappointed !

Megamicrofish · 03-08-2012, 11:56 AM

Quote:

Originally Posted by w8cmp

Well done - you won't be disappointed !

Received it today and as you say, I am not dissapointed.
Only problem I have with it is the Stun/Kill selector slides backwards and forwards too freely, anybody else have this problem?

Also, How do you display your Stun Guns ?

1999man · 29-12-2012, 12:29 AM

Hello All,
It's a moot point now but, does anyone know what happened to the Space:1999 laser rifle seen in "THE METAMORPH" and "BRIAN THE BRAIN"? Bad as this crime of stealing a "STUN GUN" was, it might have saved Space:1999's history in the long run -don't forget those trash bins?

**deraenged** · 31-12-2012, 09:59 AM

Mods...the last post and my reply have been removed.
if you are going to delete posts surely it's protocol and courteous to mention WHY?

*REPLY*
The posts were removed as they had nothing to do with the original question raised by Megamicrofish in post 1 and were considered unsavoury by me.

Bernie.

MkIXHawk · 31-12-2012, 03:31 PM

Don't like the rules? Don't post

**Captain Sci-Fi** · 31-12-2012, 04:08 PM

Hi Chaps,

Seasons greetings to you all.

I have been playing catch up through this thread, it's an interesting situation, a ponderous dilemma even. If Blackpool FC would be kind enough to publish a few pictures for us all to drool over that would be an amazing gift to the membership here.

After that, we should not judge what is right and what is wrong. Phil Rae's sex life definitely has no place on the forum, there's the reason for the post deletions. It has nothing to do with building models or any of the forum aims or ambitions. I am actually a bit disappointed that the posting members here didn't realise that they were giving the mods a hard time and forcing them to step in. No-one likes to have to edit or remove posts there is a fair amount of behind the scenes angst that goes on, it's never a simple decision.

We all have a part to play in this community so if you really want to make everyone happy build something and share it with the forum, publish something that adds to the knowledge base from the model making you are doing, I am about to start to write up on the discoveries I have made this year with new techniques that I have never tried before and the results I have obtained.

There is so much left to do, it's time to move forward.

Megamicrofish · 31-12-2012, 05:59 PM

You leave a thread for 4 or 5 months and it turns into a soap opera

**deraenged** · 01-01-2013, 08:56 AM

Happy new year everyone!

*EDIT*
The remainder of this post has been deleted. It is off topic and nothing to do with "Stun Gun Wanted" original topic. Questions or comments should now be PM'd to me directly.

Happy New year to all.

Bernie.

**Alpha149** · 01-01-2013, 09:59 PM

Removing my own derogatory comment as well as it was off topic.

Good purchase on the stun gun. I have one as well as the comlock and can't wait to get back to them!

**deraenged** · 02-01-2013, 07:05 PM

Contents removed

**deraenged** · 02-01-2013, 07:09 PM

Content removed

**deraenged** · 02-01-2013, 07:48 PM

hi bernie...i just realised i posted my message on the main forum instead of as pm...sorry, but i guess there's nothing in it that cause problems i hope....it seems to be ME that's getting all that right now!

**Captain Sci-Fi** · 02-01-2013, 08:21 PM

Time to stop the nonsense.

Before we get into the freedom of speech debate and everyone gets their ego's bent out of shape this discussion is over.

I will remove any posts not on topic, please consider the other members and the original question which I think has now been answered with his purchase of a propmaker kit.

I would be interested in your remarks when you get it Megamicrofish.

Bernie.

01-05-2012, 10:33 AM	#1
Megamicrofish Travel Tube Technician Join Date: Aug 2008 Posts: 53	Wanted:Space 1999 Stun Gun I am after a good quality Space 1999 Stun Gun Cash waiting or I may have something to trade Thanks

13-07-2012, 11:35 AM	#3
w8cmp Science Officer Join Date: Sep 2005 Location: Romford, London, England Posts: 5,505	A good one is pretty rare - and you're talking to fans here who would want it for themselves. Quite rare for one to be traded... There are however plenty of resin kits of varying quality available on the internet if you wanted to go that route. Check out eBay for example to find quite a few normally available __________________ "Hmmm...judge me by my size do you ? And well you should not, for my ally is the Force, and a powerful ally it is..."

14-07-2012, 07:18 AM	#5
w8cmp Science Officer Join Date: Sep 2005 Location: Romford, London, England Posts: 5,505	The Product Enterprise ones are not completely accurate by the way - nice but not quite right, and they don't have the nice weight of a Propmaker model. Edited by Bernie to remove old link __________________ "Hmmm...judge me by my size do you ? And well you should not, for my ally is the Force, and a powerful ally it is..."

30-07-2012, 08:54 AM	#8
w8cmp Science Officer Join Date: Sep 2005 Location: Romford, London, England Posts: 5,505	Well done - you won't be disappointed ! __________________ "Hmmm...judge me by my size do you ? And well you should not, for my ally is the Force, and a powerful ally it is..."

29-12-2012, 12:29 AM	#10
1999man Hydroponics Technician Join Date: Aug 2010 Posts: 31	Whatever happened to the Space:1999 laser rifle seen in the METAMORPH! Hello All, It's a moot point now but, does anyone know what happened to the Space:1999 laser rifle seen in "THE METAMORPH" and "BRIAN THE BRAIN"? Bad as this crime of stealing a "STUN GUN" was, it might have saved Space:1999's history in the long run -don't forget those trash bins?

19-05-2012, 04:03 PM	#2
Megamicrofish Travel Tube Technician Join Date: Aug 2008 Posts: 53	Somebody must have one they want to part with ? Cash waiting!

13-07-2012, 11:50 AM	#4
Megamicrofish Travel Tube Technician Join Date: Aug 2008 Posts: 53	I know it's a long shot I did have a pair of Sidkits (both seasons) at one time but sold them on when things were tight. Unfortunately none of the resin kits seem accurate. I'm really after a Propmaker, sidkit or perhaps the product enterprise set.

14-07-2012, 01:16 PM	#6
rockwellcm Communications Officer Join Date: Sep 2009 Location: Dundee,Scotland Posts: 1,079	Just to add to Chris`s post the PE StunGun Commlock is slightly underscale also.

25-07-2012, 06:21 PM	#7
Megamicrofish Travel Tube Technician Join Date: Aug 2008 Posts: 53	Well, I have struck a deal with a member here and a Propmaker Stun Gun is on its way to me

31-12-2012, 09:59 AM	#11
deraenged Chief Eagle Pilot Join Date: Jul 2007 Posts: 1,398	Mods...the last post and my reply have been removed. if you are going to delete posts surely it's protocol and courteous to mention WHY? REPLY The posts were removed as they had nothing to do with the original question raised by Megamicrofish in post 1 and were considered unsavoury by me. Bernie.

31-12-2012, 03:31 PM	#12
MkIXHawk Communications Officer Join Date: Sep 2005 Location: Kent, UK Posts: 1,449	Don't like the rules? Don't post

31-12-2012, 04:08 PM	#13
Captain Sci-Fi Commander Join Date: Sep 2005 Location: South Glos, UK Posts: 4,343	Hi Chaps, Seasons greetings to you all. I have been playing catch up through this thread, it's an interesting situation, a ponderous dilemma even. If Blackpool FC would be kind enough to publish a few pictures for us all to drool over that would be an amazing gift to the membership here. After that, we should not judge what is right and what is wrong. Phil Rae's sex life definitely has no place on the forum, there's the reason for the post deletions. It has nothing to do with building models or any of the forum aims or ambitions. I am actually a bit disappointed that the posting members here didn't realise that they were giving the mods a hard time and forcing them to step in. No-one likes to have to edit or remove posts there is a fair amount of behind the scenes angst that goes on, it's never a simple decision. We all have a part to play in this community so if you really want to make everyone happy build something and share it with the forum, publish something that adds to the knowledge base from the model making you are doing, I am about to start to write up on the discoveries I have made this year with new techniques that I have never tried before and the results I have obtained. There is so much left to do, it's time to move forward.

31-12-2012, 05:59 PM	#14
Megamicrofish Travel Tube Technician Join Date: Aug 2008 Posts: 53	You leave a thread for 4 or 5 months and it turns into a soap opera

01-01-2013, 08:56 AM	#15
deraenged Chief Eagle Pilot Join Date: Jul 2007 Posts: 1,398	Happy new year everyone! EDIT The remainder of this post has been deleted. It is off topic and nothing to do with "Stun Gun Wanted" original topic. Questions or comments should now be PM'd to me directly. Happy New year to all. Bernie.

01-01-2013, 09:59 PM	#16
Alpha149 Astrophysics Technician Join Date: Jun 2007 Location: Ontario, Canada Posts: 393	Removing my own derogatory comment as well as it was off topic. Good purchase on the stun gun. I have one as well as the comlock and can't wait to get back to them! Last edited by Alpha149; 02-01-2013 at 09:53 PM. Reason: off topic

02-01-2013, 07:05 PM	#17
deraenged Chief Eagle Pilot Join Date: Jul 2007 Posts: 1,398	Contents removed

02-01-2013, 07:09 PM	#18
deraenged Chief Eagle Pilot Join Date: Jul 2007 Posts: 1,398	Content removed

02-01-2013, 07:48 PM	#19
deraenged Chief Eagle Pilot Join Date: Jul 2007 Posts: 1,398	hi bernie...i just realised i posted my message on the main forum instead of as pm...sorry, but i guess there's nothing in it that cause problems i hope....it seems to be ME that's getting all that right now!

02-01-2013, 08:21 PM	#20
Captain Sci-Fi Commander Join Date: Sep 2005 Location: South Glos, UK Posts: 4,343	Time to stop the nonsense. Before we get into the freedom of speech debate and everyone gets their ego's bent out of shape this discussion is over. I will remove any posts not on topic, please consider the other members and the original question which I think has now been answered with his purchase of a propmaker kit. I would be interested in your remarks when you get it Megamicrofish. Bernie.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode