Space 1999 Eagle Transporter Forum


Go Back   Space 1999 Eagle Transporter Forum > Main Mission > The Hangar

Notices

SPONSORED BY
&

Reply Bookmark and Share
 
Thread Tools Display Modes
Old 04-07-2013, 03:11 PM   #21
Rogue Studio
Hydroponics Technician
 
Join Date: May 2012
Posts: 35
Default

I am working on some additional kit parts that I was not going to have made initially. this could affect current kit price. Some of the changes are:

1. Aluminum powdered resin sensors for the CM
2. Resin scissor links on the LP legs
3. Laser cut acrylic feet that sit on the landing pads
4. Inclusion of the Aluminum infused resin engine bells,RCTs,VTOLS into the kit. These will be an add on by the customer and priced separately at this time.

There's a few more and I can change based on request. I will work up a list as soon as all parts are completed.

Note: Price quotes are good for 7 calendar days from time quote is sent. Once payment or deposit is received your quote is locked in.
Rogue Studio is off duty   Bookmark and Share Reply With Quote
Old 04-07-2013, 11:32 PM   #22
gmcsierraclassic
Travel Tube Technician
 
Join Date: Jan 2009
Posts: 53
Default

I sent you an email but it bounced back Mr Rogue
Can you contact me through private message regarding your Eagle Kit?

I'lll be waiting for your email.

Thanks,

Steve
gmcsierraclassic is off duty   Bookmark and Share Reply With Quote
Old 05-07-2013, 12:14 AM   #23
Rogue Studio
Hydroponics Technician
 
Join Date: May 2012
Posts: 35
Default

Hey sorry about that thanks for letting me know. I'll send you a pm.
Rogue Studio is off duty   Bookmark and Share Reply With Quote
Old 08-07-2013, 03:39 AM   #24
Rogue Studio
Hydroponics Technician
 
Join Date: May 2012
Posts: 35
Default

Hey folks, Please contact me for new prices. I would update them in here but I have to contact admins with the list. The aluminum infused resin bells,VTOLS,RCTs prices are here and I will be adding that to the kit as well as some additional parts we didn't have quotes yet like aluminum infused sensors and more landing gear parts.

Lee
Rogue Studio is off duty   Bookmark and Share Reply With Quote
Old 28-07-2013, 09:48 PM   #25
darbyvet
Travel Tube Technician
 
Join Date: Apr 2013
Posts: 56
Default

Hi,
how do I order a brass spine? It is not listed on the for sale page on the FB site.Is it still $350?
Thanks

Carl
darbyvet is off duty   Bookmark and Share Reply With Quote

Old 28-07-2013, 10:41 PM   #26
stingray48442
Exile
 
Join Date: Sep 2007
Location: united states michigan
Posts: 759
Default

I make brass spines for $600.00 that's the going rate if you want one let me know. if you want a replica of a 44" eagle brass is the only way to go anything less is not a replica
www.*****************.com

Last edited by stingray48442; 28-07-2013 at 10:43 PM.
stingray48442 is off duty   Bookmark and Share Reply With Quote
Old 29-07-2013, 12:03 AM   #27
jockdeboer
Medical Technician
 
Join Date: Apr 2009
Location: Staten Island, NY
Posts: 174
Default

Just contact Lee on facebook. I do not know the price. I bought the whole kit. Just waiting on the cages and spine now.
jockdeboer is off duty   Bookmark and Share Reply With Quote
Old 30-07-2013, 06:22 PM   #28
georget
Travel Tube Technician
 
georget's Avatar
 
Join Date: Mar 2006
Location: Chicago
Posts: 74
Default spine

Just got my spine in from Lee at Rogue Studio Productions. I can not say enough how awesome it is. I believe he is only charging $375 for them.
George
georget is off duty   Bookmark and Share Reply With Quote
Old 08-08-2013, 08:05 PM   #29
Rogue Studio
Hydroponics Technician
 
Join Date: May 2012
Posts: 35
Default

Hey, Just wanted folks were clear. This kit is intended for advanced model builders. Unfortunately in order to keep the kit affordable for some there is some scratch building required..such as the landing gear, spine couplers and the central vertical mounting tube on the spines. You will also need to obtain your choice of small screws and bolts. I can provide the above for an additional charge on your kit order just request it. Thank you!

Contact: roguestudioproductions@gmail.com

Lee
Rogue Studio is off duty   Bookmark and Share Reply With Quote
Old 15-08-2013, 12:00 AM   #30
Rogue Studio
Hydroponics Technician
 
Join Date: May 2012
Posts: 35
Default

One other thing...we've had some issues getting this aluminum powder to work on the rear bells. We ran a few to see how it works out. If I don't like them we will just run our bells in epoxy resin and take it from there. I apologize we gave it a college try. to stave the aluminum wait times I am doing the work with Georget and see if we can't get the whole aluminum compliment made.

Lee
Rogue Studio is off duty   Bookmark and Share Reply With Quote

Old 22-10-2013, 06:00 PM   #31
Chris P
Travel Tube Technician
 
Chris P's Avatar
 
Join Date: Mar 2013
Posts: 73
Default

I have had several of Lees Eagle parts and can vouch for their quality. I even got parts I hadn't realised were included so I have some parts spare as I had already either made or bought brass parts.

Anyway, buy with confidence!
Chris P is off duty   Bookmark and Share Reply With Quote
Old 19-03-2015, 12:22 PM   #32
Puffy_Shirt
Medical Technician
 
Puffy_Shirt's Avatar
 
Join Date: Feb 2009
Location: Atlanta, GA
Posts: 162
Default

The full kit is now available. Looks absolutely spectacular!
Puffy_Shirt is off duty   Bookmark and Share Reply With Quote
Old 19-03-2015, 03:08 PM   #33
sliuman
Forum Supporter
 
Join Date: Sep 2005
Location: Hong Kong
Posts: 388
Default

Rogue Studios have become licensed to Anderson Entertainment so looks like no more a la carte kits.

About US$8,400-ish I think for a finished display prop with launch pad and COAs...
sliuman is off duty   Bookmark and Share Reply With Quote
Old 19-03-2015, 03:09 PM   #34
sliuman
Forum Supporter
 
Join Date: Sep 2005
Location: Hong Kong
Posts: 388
Default

double post glitch sorry
sliuman is off duty   Bookmark and Share Reply With Quote
Old 24-05-2015, 01:05 AM   #35
riven2000
Alphan
 
riven2000's Avatar
 
Join Date: Apr 2009
Posts: 9
Default

I know I've got $9000 on me somewhere....
riven2000 is off duty   Bookmark and Share Reply With Quote

Old 04-07-2015, 12:14 PM   #36
Dalroi
Forum Supporter
 
Join Date: Jan 2007
Location: UK
Posts: 30
Default

Does this mean that individual parts (such as the passenger pod) won't be available anymore?

Dalroi.
__________________
I feel sullied and unusual...
Dalroi is off duty   Bookmark and Share Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT. The time now is 12:31 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
This site and contents are copyright Bernard Walsh 2010 all rights reserved, no reproduction of material in any form without written permission email: Bernie.walsh@mac.com