Eagle interior. info needed

J-Hawkins · 20-01-2006, 01:25 PM

Hello,

I'm new here. I would like to build the interior of an Eagle (cockpit and pod) and am looking for any helpful information, hint, blueprints, etc?
Also, is there anybody in this forum, who may have worked on a similar project or are interior kits available?
Any help would be much appreciated!
Many Thanks!

DX-SFX · 20-01-2006, 01:38 PM

There are no complete interior kits available that I know of. Robert Hobby (Eagle-1) does a resin back wall for the 23" inch RU kit command module and Jim Small (eimb1999) does a printed equivalent for both 44" and 22". There is a plan of the full size sets in the paperback book "The Making Of Space 1999" by Tim Heald and Roberto Baldassari does a cutaway poster of the Eagle with the interior shoe horned into it. Your biggest problem will be getting things to fit since the sets only superficially match the exterior. If I recall, there was a guy in Europe somewhere who scratchbuilt an Eagle with an interior but I don't remember the link. Perhaps someone else can help?

J-Hawkins · 20-01-2006, 02:31 PM

Thanks for the help. Would be great to get in touch with somebody on the continent, who is also into Space 1999 models.

shrugger · 20-01-2006, 03:42 PM

Don't know if it would be something he'd be into making or not, but you
might try Jochen Ortman
Joey.Starman@web.de
He's made some right fine Eagle parts for myself, and other members
around here. And he lives in Königsbrunn.

J-Hawkins · 21-01-2006, 02:45 PM

Many thanks for the hint. I contacted Jochen, but unfortunately, he only makes exterior parts such as the nose cone or engine bells.

20-01-2006, 01:25 PM	#1
J-Hawkins Waste Technician Join Date: Jan 2006 Location: Germany Posts: 10	Eagle interior. info needed Hello, I'm new here. I would like to build the interior of an Eagle (cockpit and pod) and am looking for any helpful information, hint, blueprints, etc? Also, is there anybody in this forum, who may have worked on a similar project or are interior kits available? Any help would be much appreciated! Many Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

20-01-2006, 01:38 PM	#2
DX-SFX Chief Medical Officer Join Date: Sep 2005 Posts: 9,094	There are no complete interior kits available that I know of. Robert Hobby (Eagle-1) does a resin back wall for the 23" inch RU kit command module and Jim Small (eimb1999) does a printed equivalent for both 44" and 22". There is a plan of the full size sets in the paperback book "The Making Of Space 1999" by Tim Heald and Roberto Baldassari does a cutaway poster of the Eagle with the interior shoe horned into it. Your biggest problem will be getting things to fit since the sets only superficially match the exterior. If I recall, there was a guy in Europe somewhere who scratchbuilt an Eagle with an interior but I don't remember the link. Perhaps someone else can help?

20-01-2006, 02:31 PM	#3
J-Hawkins Waste Technician Join Date: Jan 2006 Location: Germany Posts: 10	Thanks for the help. Would be great to get in touch with somebody on the continent, who is also into Space 1999 models.

20-01-2006, 03:42 PM	#4
shrugger Eagle Pilot Join Date: Sep 2005 Location: The Great and Terrible Columbus, Ohio Posts: 504	Don't know if it would be something he'd be into making or not, but you might try Jochen Ortman Joey.Starman@web.de He's made some right fine Eagle parts for myself, and other members around here. And he lives in Königsbrunn.

21-01-2006, 02:45 PM	#5
J-Hawkins Waste Technician Join Date: Jan 2006 Location: Germany Posts: 10	Many thanks for the hint. I contacted Jochen, but unfortunately, he only makes exterior parts such as the nose cone or engine bells.