Three Legs are Better than Two - Page 3

comet · 22-03-2013, 07:05 PM

Thanks for that advice, muchly appreciated.

Dave.

**JayCub** · 24-03-2013, 12:25 AM

every update is just stunning the paintwork is really fantastic the weathering effects look spot on... can't wait for more updates..

the DOCTOR · 26-03-2013, 04:13 PM

I've made a start on a base:

Routed from18mm MDF, with a decorative edge, and a 6mm MDF platter on top to build the landscape on, it's just under 600mm across, and that's a foot long rule for scale; just sitting on the gas fire, waiting for the second coat of sanding sealer to dry.

the DOCTOR · 27-03-2013, 05:24 PM

Onto the landscape, started with a wall of sheet styrene around the platter, taped in position and sprayed with mould release, then most of a 750ml can of spray polyurethane foam was applied to the base:

When set(ish), I started to remove the excess foam, and carve a Martian landscape:

I found a few interesting 'voids' in the semi-cured foam, one of which became a cave under a ledge, when I was happy with what I had, I added the last of the foam to build up a rockface at the back:

More carving and refining tomorrow, then a coat of plaster, or possibly resin...

the DOCTOR · 28-03-2013, 03:02 PM

Added a crust to the foam:

Partly red dyed papier mache, partly render plaster, just need a day or so to fully dry out, and I can start to add some more sculpted rocks in terracotta air clay.

I've also removed the crust from some of the more interesting 'globs' of foam, and I'm really pleased with how the ledge and cave have turned out- I wanted something akin to Vasquez Rocks, and I got it accidentally!

**DARKVIEW** · 31-03-2013, 11:13 AM

Fantastic attention to detail sir, real pro work.

the DOCTOR · 15-04-2013, 06:51 PM

I have been painting the Martian terrain, and have found something 'living' in the cave under the tank's foot:

Three eerie, glowing eys, or possibly three LEDs in a holder, attached to a battery:

More soon!

**Howard** · 15-04-2013, 07:16 PM

Stunning, sophisticated and perfectly realised.

Lrl · 22-04-2013, 12:12 AM

Is there more? (what more can there be? (I hope there's more)) May this thread never unravel.

**JayCub** · 23-04-2013, 11:38 PM

It's one of those threads you wish would go on for ages, great source of inspiration, the Martian in the base was probably having a kit kat.. superb modelling

Lrl · 24-04-2013, 06:01 AM

Martian kit kats have three fingers, and are called Kit Kat Kots

Twix are called Trix, and double deckers have an extra deck. They don't have Snickers, but do, of course, have Mars bars.

the DOCTOR · 24-04-2013, 08:54 PM

Quote:

Originally Posted by Lrl

Martian kit kats have three fingers, and are called Kit Kat Kots

Twix are called Trix, and double deckers have an extra deck. They don't have Snickers, but do, of course, have Mars bars.

XD

Only managed to do a little more, mainly involving removing the 0.05mm styrene from the sides of the terrain (it was too thin, and i used a filler that basically melted it!), and replaceing it with 0.75mm styrene, looks much neater now. I also tried a new colour for the rock:

**JayCub** · 25-04-2013, 11:28 AM

looks absolutely stunning, it has a Victorian look about it with don't touch me or else, and I see an eagle command module in the garage window with some shoulder pods, maybe a new project on the horizon.

I have to say I really enjoyed the build log to date

Lrl · 25-04-2013, 01:10 PM

Spotted

the DOCTOR · 25-04-2013, 07:48 PM

I knew there was a reson so many probes get 'lost' on Mars...

Meanwhile, dyed some sand red:

As I couldn't find any one selling any, though I could have tried a petshop...

the DOCTOR · 30-04-2013, 01:35 PM

I couldn't leave those three glowing eyes as they were, so I've sculpted a little Martian:

Here he/she/it is with the eyes aglow:

With the LEDs at full power, without a limiting resistor, it causes the whole cave to glow, allowing a partial sighting of the creature to be made.

the DOCTOR · 30-04-2013, 08:59 PM

Splashed some paint on, including blood on the teeth and tentacles:

Lrl · 01-05-2013, 08:14 AM

Nice bit of splashing, I can only wonder what would happen if you used a brush. You'll be saying you threw the model together next.

the DOCTOR · 11-05-2013, 09:17 AM

Just a quick shot of the critter in it's cave:

and a quick try out of some as yet un-modified British figures, on the outcrop above the cave:

Just need to sculpt some sort of pressure suit/uniform on them, and the other two figures...

31-03-2013, 11:13 AM	#46
DARKVIEW Deputy Commander Join Date: Mar 2008 Location: Newcastle Posts: 766	Fantastic attention to detail sir, real pro work. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Official website: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. darkview quality prints to buy from New York: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

24-04-2013, 06:01 AM	#51
Lrl Computer Technician Join Date: Feb 2012 Location: Sheffield Posts: 209	Martian kit kats have three fingers, and are called Kit Kat Kots Twix are called Trix, and double deckers have an extra deck. They don't have Snickers, but do, of course, have Mars bars. Last edited by Lrl; 24-04-2013 at 06:09 AM.

25-04-2013, 01:10 PM	#54
Lrl Computer Technician Join Date: Feb 2012 Location: Sheffield Posts: 209	Spotted Last edited by Lrl; 25-04-2013 at 03:37 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

22-03-2013, 07:05 PM	#41
comet Chef Join Date: Feb 2012 Posts: 21	Thanks for that advice, muchly appreciated. Dave.

24-03-2013, 12:25 AM	#42
JayCub Life Support Technician Join Date: Dec 2012 Location: Garden of Ireland Posts: 95	every update is just stunning the paintwork is really fantastic the weathering effects look spot on... can't wait for more updates..

26-03-2013, 04:13 PM	#43
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	I've made a start on a base: Routed from18mm MDF, with a decorative edge, and a 6mm MDF platter on top to build the landscape on, it's just under 600mm across, and that's a foot long rule for scale; just sitting on the gas fire, waiting for the second coat of sanding sealer to dry.

27-03-2013, 05:24 PM	#44
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	Onto the landscape, started with a wall of sheet styrene around the platter, taped in position and sprayed with mould release, then most of a 750ml can of spray polyurethane foam was applied to the base: When set(ish), I started to remove the excess foam, and carve a Martian landscape: I found a few interesting 'voids' in the semi-cured foam, one of which became a cave under a ledge, when I was happy with what I had, I added the last of the foam to build up a rockface at the back: More carving and refining tomorrow, then a coat of plaster, or possibly resin...

28-03-2013, 03:02 PM	#45
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	Added a crust to the foam: Partly red dyed papier mache, partly render plaster, just need a day or so to fully dry out, and I can start to add some more sculpted rocks in terracotta air clay. I've also removed the crust from some of the more interesting 'globs' of foam, and I'm really pleased with how the ledge and cave have turned out- I wanted something akin to Vasquez Rocks, and I got it accidentally!

15-04-2013, 06:51 PM	#47
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	I have been painting the Martian terrain, and have found something 'living' in the cave under the tank's foot: Three eerie, glowing eys, or possibly three LEDs in a holder, attached to a battery: More soon!

15-04-2013, 07:16 PM	#48
Howard Deputy Commander Join Date: Jun 2006 Location: Seaford, East Sussex. Posts: 822	Stunning, sophisticated and perfectly realised.

22-04-2013, 12:12 AM	#49
Lrl Computer Technician Join Date: Feb 2012 Location: Sheffield Posts: 209	Is there more? (what more can there be? (I hope there's more)) May this thread never unravel.

23-04-2013, 11:38 PM	#50
JayCub Life Support Technician Join Date: Dec 2012 Location: Garden of Ireland Posts: 95	It's one of those threads you wish would go on for ages, great source of inspiration, the Martian in the base was probably having a kit kat.. superb modelling

25-04-2013, 11:28 AM	#53
JayCub Life Support Technician Join Date: Dec 2012 Location: Garden of Ireland Posts: 95	looks absolutely stunning, it has a Victorian look about it with don't touch me or else, and I see an eagle command module in the garage window with some shoulder pods, maybe a new project on the horizon. I have to say I really enjoyed the build log to date

25-04-2013, 07:48 PM	#55
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	I knew there was a reson so many probes get 'lost' on Mars... Meanwhile, dyed some sand red: As I couldn't find any one selling any, though I could have tried a petshop...

30-04-2013, 01:35 PM	#56
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	I couldn't leave those three glowing eyes as they were, so I've sculpted a little Martian: Here he/she/it is with the eyes aglow: With the LEDs at full power, without a limiting resistor, it causes the whole cave to glow, allowing a partial sighting of the creature to be made.

30-04-2013, 08:59 PM	#57
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	Splashed some paint on, including blood on the teeth and tentacles:

01-05-2013, 08:14 AM	#58
Lrl Computer Technician Join Date: Feb 2012 Location: Sheffield Posts: 209	Nice bit of splashing, I can only wonder what would happen if you used a brush. You'll be saying you threw the model together next.

11-05-2013, 09:17 AM	#59
the DOCTOR Computer Technician Join Date: Sep 2005 Posts: 218	Just a quick shot of the critter in it's cave: and a quick try out of some as yet un-modified British figures, on the outcrop above the cave: Just need to sculpt some sort of pressure suit/uniform on them, and the other two figures...