19" UFO Interceptor

**stingray48442** · 13-04-2009, 03:29 PM

im am doing a ufo interceptor 19 inch hollow cast with decals this will be ready for production verry soon it may have brass landing struts deepending on if i can get enough intrested in ordering if anyone is interested please email me at platt980@comcast.net

**stingray48442** · 13-04-2009, 03:52 PM

it will have a full interia with pilot.im going to try to keep the price down to around $500.00 depending on the interest pictures to follow soon

RCnut · 13-04-2009, 04:58 PM

What scale is that, As im supposed to be doing a 24th scale one, But if your doing one the same size, I'll give it a miss.

**stingray48442** · 16-04-2009, 04:37 PM

http://s235.photobucket.com/albums/e...Picture281.jpg

http://s235.photobucket.com/albums/e...Picture278.jpg

RCnut · 16-04-2009, 05:51 PM

Well thinking about it, As your based in the states I think ill go ahead and do one for the british Market, S+H cost being such that sales to one or the others will push prices up to make the kits unobtainable by overseas customers.

LazyEagle · 17-04-2009, 02:44 PM

Looking forward to your Interceptor Mamas...

Sanjay

**stingray48442** · 05-09-2009, 12:45 AM

almost done just test fitting the parts i will be taking orders for this kit

Tim Smith · 05-09-2009, 07:17 PM

WOW!! But that would be a dangerous place to put models in my house! My ears ring just thinking about what would be said.

**stingray48442** · 28-10-2009, 11:25 PM

**stingray48442** · 28-10-2009, 11:33 PM

prototype intercepter almost done if anyone is interested in a kit of this please email me at platt980@comcast.net it is 19 inches long with a pilot and clear canopy

**stingray48442** · 02-11-2009, 06:09 PM

almost done no one showing any interest i may have to scrap the idea of production

**Interceptor6** · 03-11-2009, 11:55 AM

Still interested here, though timing for $$$ sucks. Poured a new driveway last week, and daughter #2 gets married Saturday! BUSY BUSY!!
Jeff

**stingray48442** · 12-11-2009, 12:47 AM

intercepter vents or on getting close to finish

hdknight · 16-11-2009, 04:22 PM

Interested yes, But that's a bunch of $$$ considering my limited modeling skills.
God I'd hate to screw up a $500.00 model. But who knows what will happen after the Holidays, waiting on a new job....;(

Workshop Artist · 20-01-2010, 02:06 AM

What scale is this Interceptor is being built in?

Is it 1/35th or 1/48 scale?

Will you consider retooling this Interceptor to be a 1/48 scale kit?

**Knight1966** · 20-01-2010, 02:39 PM

Great work so far Stingray though ,if you don't mind an observation (or 2), the 'tailfin' needs refining, front strut 'too' thick and the angles 'appear' slightly off. In fairness if this is your 'interpretation' of this subject all well and good but if you're hoping to sell this as a replica of the original then those bits need revising. Excellent effort though Bravo

**stingray48442** · 20-01-2010, 05:20 PM

thanks for the input i always welcome comments thats the only way to get things corrected i also noticed the engine on the back is a little small still working on it befor i mold it i will post pics and accept input on it

Workshop Artist · 20-01-2010, 05:41 PM

Quote:

Originally Posted by stingray48442

im am doing a ufo interceptor 19 inch hollow cast with decals this will be ready for production verry soon it may have brass landing struts deepending on if i can get enough intrested in ordering if anyone is interested please email me at platt980@comcast.net

You should consider reducing the price for it down to $200.00 to $150.00
USD and having it retooled down into a 1/48 scale production kit,that
would a lot of customers very interested in ordering for one.I know I
would.

**stingray48442** · 20-01-2010, 06:57 PM

this intercepter is this size. i want it this size for myself that was my plan all im saying is if anyone wants one i will mold it i do all the models for me at the size i want i do molds of almost all my models incase anyone wants one this is my way of contributing to the sight just like everyone else has and does and should

LazyEagle · 20-01-2010, 08:44 PM

This is coming along quite nicely, impressive build, and the size looks just right.

Look forward to the completed prototype.

Sanjay

13-04-2009, 03:29 PM	#1
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	19" UFO Interceptor im am doing a ufo interceptor 19 inch hollow cast with decals this will be ready for production verry soon it may have brass landing struts deepending on if i can get enough intrested in ordering if anyone is interested please email me at platt980@comcast.net

02-11-2009, 06:09 PM	#11
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	19 inch intercepter almost done no one showing any interest i may have to scrap the idea of production

03-11-2009, 11:55 AM	#12
Interceptor6 Astrophysics Technician Join Date: Jul 2009 Location: Sarasota, Florida USA Posts: 454	Still interested here, though timing for $$$ sucks. Poured a new driveway last week, and daughter #2 gets married Saturday! BUSY BUSY!! Jeff __________________ It's always darkest, before it's totally black! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

20-01-2010, 02:06 AM	#15
Workshop Artist Computer Technician Join Date: Sep 2009 Location: St Catharines,Ont,Canada Posts: 243	What scale is this Interceptor is being built in? Is it 1/35th or 1/48 scale? Will you consider retooling this Interceptor to be a 1/48 scale kit? Last edited by JD; 20-01-2010 at 02:42 AM. Reason: Redundant pic quote, as usual!

20-01-2010, 02:39 PM	#16
Knight1966 Communications Officer Join Date: Jul 2006 Location: SE Kent Posts: 1,117	Great work so far Stingray though ,if you don't mind an observation (or 2), the 'tailfin' needs refining, front strut 'too' thick and the angles 'appear' slightly off. In fairness if this is your 'interpretation' of this subject all well and good but if you're hoping to sell this as a replica of the original then those bits need revising. Excellent effort though Bravo __________________ I disagree with what you say, but I'd fight to the death to defend your right to say it

13-04-2009, 03:52 PM	#2
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	it will have a full interia with pilot.im going to try to keep the price down to around $500.00 depending on the interest pictures to follow soon

13-04-2009, 04:58 PM	#3
RCnut Communications Officer Join Date: Apr 2008 Location: The windy city, well corner then. Posts: 771	What scale is that, As im supposed to be doing a 24th scale one, But if your doing one the same size, I'll give it a miss.

16-04-2009, 04:37 PM	#4
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	http://s235.photobucket.com/albums/e...Picture281.jpg http://s235.photobucket.com/albums/e...Picture278.jpg

16-04-2009, 05:51 PM	#5
RCnut Communications Officer Join Date: Apr 2008 Location: The windy city, well corner then. Posts: 771	Well thinking about it, As your based in the states I think ill go ahead and do one for the british Market, S+H cost being such that sales to one or the others will push prices up to make the kits unobtainable by overseas customers.

17-04-2009, 02:44 PM	#6
LazyEagle Medical Technician Join Date: Sep 2005 Location: London Posts: 199	Looking forward to your Interceptor Mamas... Sanjay

05-09-2009, 12:45 AM	#7
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	almost done just test fitting the parts i will be taking orders for this kit

05-09-2009, 07:17 PM	#8
Tim Smith Communications Officer Join Date: May 2006 Location: Birmingham, AL Posts: 1,170	WOW!! But that would be a dangerous place to put models in my house! My ears ring just thinking about what would be said.

28-10-2009, 11:25 PM	#9
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631

28-10-2009, 11:33 PM	#10
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	prototype intercepter almost done if anyone is interested in a kit of this please email me at platt980@comcast.net it is 19 inches long with a pilot and clear canopy

12-11-2009, 12:47 AM	#13
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	intercepter vents or on getting close to finish

16-11-2009, 04:22 PM	#14
hdknight Hydroponics Technician Join Date: Feb 2009 Location: Metro Wash DC suburbs Posts: 48	Interested yes, But that's a bunch of $$$ considering my limited modeling skills. God I'd hate to screw up a $500.00 model. But who knows what will happen after the Holidays, waiting on a new job....;(

20-01-2010, 05:20 PM	#17
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	thanks for the input i always welcome comments thats the only way to get things corrected i also noticed the engine on the back is a little small still working on it befor i mold it i will post pics and accept input on it

20-01-2010, 06:57 PM	#19
stingray48442 Eagle Pilot Join Date: Sep 2007 Location: united states michigan Posts: 631	this intercepter is this size. i want it this size for myself that was my plan all im saying is if anyone wants one i will mold it i do all the models for me at the size i want i do molds of almost all my models incase anyone wants one this is my way of contributing to the sight just like everyone else has and does and should

20-01-2010, 08:44 PM	#20
LazyEagle Medical Technician Join Date: Sep 2005 Location: London Posts: 199	This is coming along quite nicely, impressive build, and the size looks just right. Look forward to the completed prototype. Sanjay

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode